Wood stove installation cost in Quebec in 2026 usually lands between $3,000 and $7,000 when a certified stove replaces an old one on a chimney that is still in good shape, and between $6,000 and $13,000 when a new insulated chimney has to be built through the roof. The stove itself is often less than half of the bill: the chimney, floor and wall protection, labour and permits make up the rest.
In short: plan roughly $2,000 to $5,000 for a certified stove or insert, $500 to $1,500 for installation labour, and anywhere from a few hundred dollars to $6,000 for the venting system, depending on what is already in the house. All prices below are indicative 2026 ranges in Canadian dollars, before GST and QST, not official rates.
Wood stove installation cost in Quebec: 2026 price table
The table groups the most common project types in Montreal, Laval, Longueuil, the North Shore and the South Shore. Rural homes with long chimney runs or difficult roof access can sit above these ranges.
| Project type | What it usually includes | Indicative total (2026, before taxes) |
|---|---|---|
| Replace an old stove with a certified stove | Removal of old unit, new stove, new smoke pipe, connection to existing chimney in good condition | $3,000 to $7,000 |
| Wood insert in a masonry fireplace | Insert, full-height stainless steel liner, surround, sealing of the damper area | $5,000 to $10,000 |
| New freestanding stove with new chimney | Stove, hearth pad, insulated factory-built chimney through ceiling and roof, flashing, roof support | $6,000 to $13,000 |
| Pellet stove | Pellet stove, direct vent or short chimney, electrical outlet nearby | $4,000 to $8,000 |
| Wood furnace or boiler added to central heating | Certified unit, ductwork or piping tie-in, chimney | $8,000 to $18,000+ |
Add 14.975% for GST and QST. A $6,000 project becomes about $6,900 once taxes are included.
Line-by-line breakdown: where the money goes
When you compare quotes, ask each installer to separate these items. It is the easiest way to see whether one price is low because something was left out.
| Item | Indicative price (2026) | Notes |
|---|---|---|
| Certified freestanding wood stove | $1,800 to $5,000 | Steel models at the low end, cast iron and soapstone at the high end |
| Certified wood insert | $2,500 to $6,000 | Sized to the existing fireplace opening |
| Installation labour | $500 to $1,500 | One to two days for most jobs; more for a new chimney |
| Stainless steel liner (existing masonry chimney) | $1,500 to $4,500 | Often required for inserts and for old clay-tile flues |
| New insulated factory-built chimney | $2,500 to $6,000 | Price rises with height, number of floors crossed and roof pitch |
| Smoke pipe (stove to chimney) | $200 to $600 | Double-wall pipe reduces required clearances |
| Hearth pad or floor protection | $200 to $1,000 | Ceramic or stone on a non-combustible base costs more |
| Wall heat shield | $200 to $800 | Lets the stove sit closer to a combustible wall |
| Removal and disposal of old unit | $150 to $500 | Heavy cast iron units on upper floors cost more to move |
| Municipal permit | Varies by town | Check with your borough or municipality before work starts |
The rules every Quebec wood stove must meet
Before choosing a model, check the legal side. It affects which stoves you can buy and, in some cities, whether you can keep using an existing one at all.
Province-wide certification for new appliances
Under Quebec’s regulation respecting wood-burning appliances, any wood heating appliance manufactured, sold or distributed in the province since September 1, 2009 must meet the CSA B415.1 standard or the U.S. EPA emission standard. In practice, any new stove from a reputable retailer is certified, but a used stove bought privately may not be. Look for the certification label on the back of the unit before you pay.
Montreal: the 2.5 g/h limit and smog warnings
The City of Montreal (montreal.ca) only allows solid-fuel appliances that emit less than 2.5 grams of fine particles per hour in its 19 boroughs, and bans the use of any solid-fuel appliance during a smog warning. If you live on the island, ask the installer for the emission rate on the certification sheet, not just the word “certified”. Several suburbs in Laval, the West Island and the South Shore have their own bylaws, so call your city before signing.
Quebec City: deadline passed on September 1, 2026
According to the City of Quebec (ville.quebec.qc.ca), since September 1, 2026 only wood-burning appliances certified CSA B415.1 or EPA may be used on its territory, and the city has run a subsidy program to help owners remove or replace older units. If you own an uncertified stove there, replacement is no longer optional if you want to keep burning wood.
Safety guidance from the Government of Quebec
The Government of Quebec’s page on wood heating fire prevention reminds owners to have the appliance installed according to the manufacturer’s instructions, to respect clearances to combustible materials and to keep the chimney clean. Follow the manual to the letter: clearances and floor protection are set by the manufacturer for each model.
What makes wood stove installation cost go up
- No usable chimney. Building a new insulated chimney through one or two floors and the roof is the single biggest cost jump.
- Old masonry flue. Cracked clay tiles or a flue that is too large for a modern stove usually need a stainless liner from top to bottom.
- Location in the house. A basement stove under a finished ceiling or a second-floor install in a plex means more chimney length and more finishing work.
- Roof type and height. Steep roofs, metal roofing and three-storey buildings need extra safety equipment and flashing work.
- Stove material and size. Cast iron and soapstone stoves cost more and are heavier to bring in.
- Finishes. A stone or tile hearth and a decorative wall shield look better but add several hundred dollars.
- Season. October and November are peak months. Booking in spring or summer usually means more availability.
Step-by-step: how a typical installation goes
- Site visit. The installer measures the room, checks the existing chimney or roof path and confirms clearances.
- Model selection. You choose a certified stove sized to the space you actually want to heat, not the largest model in the store.
- Permit and insurer. You or the installer apply for any municipal permit, and you tell your home insurer about the planned work.
- Removal. The old unit and its pipe are taken out and the chimney is swept and inspected.
- Venting work. A liner is dropped into the masonry flue or a new insulated chimney is built through the ceiling and roof.
- Floor and wall protection. The hearth pad and any heat shields are installed to the manufacturer’s dimensions.
- Stove placement and connection. The stove is set, levelled and connected with the right smoke pipe.
- First fire and paperwork. The installer runs a test fire, explains break-in and gives you the invoice, model number and certification details for your insurer.
Insurance, maintenance and running costs
Most home insurers in Quebec want to know about any wood-burning appliance, and many ask for proof of professional installation or an inspection report. Call your insurer before the work: a surprise at renewal can cost more than the stove. Keep the invoice, a photo of the certification label and the installer’s details in one file.
Once the stove is running, budget for an annual sweep. Our guide to chimney sweep cost in Quebec covers current prices and what a proper visit includes. Dry hardwood, small hot fires rather than smouldering ones, and a working carbon monoxide alarm near the stove are basic habits for every household.
If you are weighing wood against other heating options, compare the numbers with our pages on heat pump installation cost in Quebec and electric furnace replacement cost. Many Quebec homes now combine electric heating with a certified wood stove as backup during outages and cold snaps. For programs that may apply to other parts of your project, see our Quebec renovation grants guide for 2026.
Checklist before you sign a quote
- Is the stove model named, with its CSA B415.1 or EPA certification and, in Montreal, an emission rate under 2.5 g/h?
- Does the quote list the chimney or liner work separately, with length and diameter?
- Are the hearth pad, wall shields and smoke pipe included, or billed as extras?
- Who handles the municipal permit, and is its cost included?
- Is removal and disposal of the old unit part of the price?
- Has the installer worked with your type of chimney before, and can they provide references?
- If carpentry, roofing or masonry work is involved, have you checked the company’s licence on the Régie du bâtiment du Québec website?
- Are taxes, the labour warranty and the date of the first fire written down?
Compare up to 4 free quotes for your wood stove
Installation prices vary a lot from one company to another, especially when chimney work is involved. Describe your project once and receive up to 4 free quotes from heating and chimney contractors serving Montreal, Laval, Longueuil, the West Island, the North Shore and the South Shore.
Get up to 4 free quotes now or see our chimney, fireplace and stove quotes page.
Frequently Asked Questions
How much does it cost to install a wood stove in Quebec?
Most projects fall between $3,000 and $7,000 before taxes when a chimney in good condition can be reused, and between $6,000 and $13,000 when a new insulated chimney is needed. The stove, the venting and the labour are the three main parts of the price.
Can I still use a wood stove in Montreal?
Yes, if the appliance is certified and emits less than 2.5 grams of fine particles per hour, according to the City of Montreal. No solid-fuel appliance may be used during a smog warning, even a certified one. Older uncertified stoves and open fireplaces cannot be used to burn wood on the island.
Do I need a permit to install a wood stove?
Many Quebec municipalities require a permit or a declaration for a new wood-burning appliance or chimney. Rules differ from one city to the next, so check with your borough or town hall before work begins and keep the permit with your insurance file.
Is a wood insert cheaper than a freestanding stove?
The insert itself can cost about the same, but the total is often higher because most inserts need a full-height stainless steel liner in the masonry chimney. A freestanding stove connected to a sound existing chimney is usually the least expensive option.
How long does a wood stove installation take?
Replacing a stove on an existing chimney typically takes one day. Projects that include a liner or a new chimney through the roof usually take one to three days, plus any wait for the permit.